Straw Paper Strip Roll Slitting Rewinding Machine

Short Description:

 Straw Paper Strip Roll Slitting Rewinding Machine Use: Machine in this series are mainly suitable for straw paper. Feature:   1. The machine use center winding and the surface drum rewinding. 2. Web guide system, automatic tension control system with magnetic powder brake and clutch device 3. Machine with meter counter, automatic stop 4. Frequency Inverter control main motor 5. Optional : 3 Servo motor control rewinding system, Max rewinding diameter 800mm,Siemens PLC Touch Screen automati...


  • Port: DALIAN/ XIINGANG/ NINGBO
  • Payment Terms: T/T
  • Product Detail

    Product Tags

     Straw Paper Strip Roll Slitting Rewinding Machine

    Use:

    Machine in this series are mainly suitable for straw paper.

    Feature:

     

    1. The machine use center winding and the surface drum rewinding.

    2. Web guide system, automatic tension control system with magnetic powder brake and clutch device

    3. Machine with meter counter, automatic stop

    4. Frequency Inverter control main motor

    5. Optional : 3 Servo motor control rewinding system, Max rewinding diameter 800mm,Siemens PLC Touch Screen automatic tension control system

     

    Main technical parameter:

     

    Max. Width of roll material 600mmr
    Max. Diameter of roll material 1000mm
    Max. Diameter of rewinding roll 600mm
    Min. Width of slitting 13.5mm,14mm and 15mm
    Slitting Speed 0-120m/min
    Total Power 6.5kw
    Overall dimension ( L x W x H mm) 2200x2000x1400
    Weight 2200kg

     

     

     

     

    Specification
    1. Unwinder
    A. The machine with Manual horizontal alignment , Eliminates tension and wrinkles caused by

    the thick ends or uneven cores of the raw materials

    B. The high linear magnetic powder brake is used as the unwinding tension actuator. The output torque is balanced, and the tension fluctuation can be reduced to the lowest state. The Siemens PLC automatically detects and calculates the size of the material through online and automatically controls the unwinding tension output.
    C. Loading Materila , pneumatic lift loading (Optional Unit )
    D. Air Shaft Unwinder, 100NM magnetic powder brake tension controled by PLC
    E, Web Guide Control Ssyem

     

    2Slitting System

     

    The machine uses a round knife to cut, the incision is neat, and the service life is long. The upper and lower knife axes of the slitting are widened, and the speeds of the upper and lower knife shafts are matched by the gears. Rotate the hand wheel to implement the knife, and continue turning to achieve automatic knife.
    A, Slitting shaft , 1 set Top knife shaft and 1 set bottom knife shaft
    B, Locking device: With a rapid tool setting device, it can lock the upper knife shaft to avoid cutting quality problems caused by the upper and lower knife disengagement or movement.
    C, High-pressure fan through the blowing pipe diversion, the waste edge come out
    D, 30MM Main wall plate: The use of steel wall panels, effective damping, to facilitate the smooth operation of the machine at high speed
    E, φ100×950mm Guide roller: chrome plated, polished

     

     

    3, Rewinding Unit

     

    A, This machine adopts two-axis rolling of the left and right axles. It is equipped with a pressure arm to balance the pressure inside and outside the winding. The drive adopts two frequency conversion vector motors, the uniaxial tension is arbitrarily adjustable, and the winding tension increases with the increase of the winding volume. The winding volume is automatically calculated by the PLC and the control tension is automatically calculated.

     

    B, magnetic powder clutch control rewinding steel shaft rewindingand paper core PLC control tension

     

     

     

     

    5. Main Electrical Part
    A, Centralized control of the cabinet, beautiful and easy to operate. PLC automatic tension control
    B, One meter counter  , real-time linear speed real-time, meter meter auto stop function (with deceleration stop function, remember meter basically no error)

     

    C, Button ,Contactor ,air switchair

     

     

     

     

     

     

    Machine List

     

    Number

    Name

    Part Quantity
    1 Unwinder 3 Inches Air Shaft 1pcs
    2 Unwinder Tension 10kg Magnetic powder brake 1 Set
    3 Main Motor 5.5KW 1 Set
    4 Inverter 5.5KW 1 Set
    5 Web Guide   1 Set
    6 Slitting knife 13.5mm Paper Width 600mm 21 Sets
    7 Slitting knife 14mm Paper Width 600mm 22 Sets
    8 Spacer 5mm Spacer,  Paper Width 300mm 20 Sets
    9 Rewinding Driving 5kg Magnetic powder clutch 2 Sets
    10 Rewinding Contro PLC automatic tension control 1 Sets
    11 Rewinding Air Shaft 3inches 2 pcs
    12 Waste edge FAN 1 SET
    13 PLC Touch Screen 1 SET
    14 Main Electrical Button ,Contactor ,air switchair All

     

     

     

     

     

     

     

     

     

     

     

     

     

    Spare Parts list

    Monkey wrench   1 pc
    Ringent wrench 12×14 1 pc
    Ringent wrench 17×19 1 pc
    Ringent wrench 8×10 1 pc
    Screw driver “十”shape 1 pc
    Screw driver “一”shape 1 pc
    Inner hexagonal wrench   1 pc
    Oil gun   1 pc

  • Previous:
  • Next:

  • 
    WhatsApp Online Chat !