Biodegradable Materials and Products Supplier - Fancyco

PLA polymer REVODE105

Short Description:

REVODE105 is one kind of modified PLA which is specifically designed for transparent straws. Properties of REVODE105   PLA resin REVODE105 Testing methods Physical properties Density (g/cm3) 1.25±0.05 GB/T1033-1986 Melt flow rate ( g/10min ,190℃/2.16Kg) 3-8 GB/T3682-2000 Heat distortion temperature (℃) 60   Molding shrinkage rate (parallel  melt flow direction) 0.005 ISO294-4:2001 Molding shrinkage (vertical melt flow direction) 0.003   ISO294-4:2001 Mechanical properties ...


  • FOB Price: US $ 0.5 - 9.999 / Piece
  • Min.Order Quantity: 100 Piece / Pieces
  • Supply Ability: 10000 Piece / guda da Watan
  • Port: Shenzhen
  • Biya Terms: L / C, D / A, D / P, T / T
  • samfurin Detail

    samfurin Tags

    REVODE105 ne daya irin modified PLA wanda aka musamman tsara don m straws.

    Properties na REVODE105

      PLA guduro REVODE105 gwaji da hanyoyin
    jiki Properties
    Yawa (g / cm3) 1.25 ± 0.05 GB / T1033-1986
    Narke kwarara kudi (g / 10min, 190 ℃ / 2.16Kg) 3-8 GB / T3682-2000
    Heat murdiya zazzabi (℃) 60  
    Gyaren shrinkage kudi (a layi daya narke kwarara shugabanci) 0,005 ISO294-4: 2001
    Gyaren shrinkage (a tsaye narke kwarara shugabanci) 0,003   ISO294-4: 2001
    inji Properties
    Tensile ƙarfi (Mpa) 45-60 GB / T1040-2006
    Elongation a hutun (%) ≥ 10 GB / T1040-2006
    Impact ƙarfi (KJ / m2, Izod) 3 GB / T1043-2008

    Aikace-aikace:

    A PLA guduro REVODE105 ne dace da aiki na ba zafi-resistant da kuma m mike straws, ba dace da mai lankwasa straws.

    sarrafa Information

    A REVODE105 guduro za a iya sarrafa a kan gargajiya propylene (PP) rauno extrusion gyare-gyaren inji. Lokacin da sarrafa, don Allah a kula:

    I: The aiki zazzabi (da takamaiman zazzabi bukatar a gyara):

    Zafi farko sashe (kusa feed makogwaro): 130-150 ℃, sauran sassan: 160-180 ℃ PLA guduro REVODE105 fara dab a zazzabi sama 60 ℃, idan akwai ma high zafin jiki a ciyar makogwaro take kaiwa zuwa guduro agglomeration da unsmooth ciyar, shi bada shawarar zuba sanyaya ruwa a cikin jacket a ciyar da makogwaro sashe.

    Saboda REVODE105 ne mafi gaggautsa fiye da na gargajiya PP guduro, duka biyu na ƙyallen maƙalawa iya karya lokacin da yankan bututu. An shawarar don sarrafa ruwa zafin jiki a ruwa tank tsakanin 35 da 40 ℃, tabbatar da bututu yana high zafin jiki a lokacin da yankan, haka kauce wa sauki fatattaka.

    II: Color blending

    Idan samfur bukatar a canza launin, tabbatar don amfani na musamman launi Toner ko PLA-tushen launi master tsari. M Toner ko launi master tsari na iya haifar da gaggautsa samfurin, unsmooth samfurin surface kuma ko da kasa extrude.

    Idan launi blending kayan ba za a iya amfani up cikin 2 hours, shi ne shawarar yin amfani da 25 kg / jakar guduro duk a lokaci daya, a maimakon haka, yi amfani da rabin da shi, kuma Ya sanya hãtimi a kan sauran rabin tare da zafi sealing na'urar a lokaci daya. The manufa shi ne ya bijirar da abu zuwa ga iska kamar yadda takaice kamar yadda zai yiwu.

    III: Bushewa

    REVODE105 an sarrafa ta bushewa crystallization, da danshi abun ciki shi ne kasa than400 ppm. A guduro cewa adana a Aluminum tsare jakar, kare da akwatin ko jakar waje za a iya amfani da kai tsaye. Rike kunshin shãfe haske har shirye don amfani kuma da sauri reseal wani sauran abu, ko da guduro zai sha da danshi. Bayan fiye da, da guduro iya gabatar da wani ya karu motsi a lokacin da tsari, da kuma kayayyakin iya samun gaggautsa dukiya, surface shrinkage. Idan guduro fallasa a cikin yanayi na fiye da sa'a daya, ya kamata a sake bushe kafin ta amfani, in ba haka ba, da guduro za a iya amfani da kai tsaye. The yiwuwar mamaye danshi ba za a iya cire, idan guduro fallasa a cikin yanayi tare da babban danshi.

    Lokacin da sake-bushewa da guduro, da un-dehumidified zafi iska an haramta, don ba tare da dehumidifier, ba kawai da bushewa sakamako ba za a iya samu, amma kuma da gudun ruwa absorbance na PLA guduro za a iya kara. A dehumidified iska iya tabbatar da bushewa sakamako na PLA guduro a desiccator. Lokacin amfani janar tanda, da dehumidification kayan aiki da ya kamata a yi amfani da su dehumidify iska a cikin oven.SD-H jerin saƙar zuma-ƙafafun-type dehumidifiers kawota ta Shini Pla stics Technologies Inc. an karfi da shawarar ga PLA bushewa, da sauran equipments da guda dehumidified sakamako kuma za a iya zaba.

    Hankula bushewa yanayi da ake nuna a cikin tebur a kasa:

    bushewa siga hankula Saituna
    Residence Time (hours) 2-3
    Iska zazzabi (℃) 80 (zafin jiki na al'ada tanda)
    Air Dew Point (℃) -40 (zafin jiki na dehumidifier)
    Air Flow Rate (M3 / hr-kg guduro) > 1,85

    lura:

    Rufe gagara a kasa na hopper da kuma kawar da ganga a lokacin rufe saukar da na'ura na gajeren lokaci (a cikin 30 min), guje wa tarewa da abinci makogwaro. Bude gagara, kuma ku ciyar guduro bayan gaskatãwa sake fara allura.

    Idan launi juya hali da kuma saki ya faru a lokacin gyare-gyaren tsari, kawar da ganga nan da nan don tsayar da jihar na kayan. Ci gaba a guje idan abu ne na al'ada, ko daidaita da sigogi.

    Farfadowa da na'ura na lura da sabunta kayan:

    A m kayayyakin da ake samarwa a cikin revode105 samar da tsari za a iya sarrafa da kuma sarrafa shi da sabon materials.The rabo daga Bugu da kari kada ta kasance ma manyan, in ba haka ba da samfurin zai zama ma gaggautsa.

    A sake yin fa'ida kayan za a iya bi a cikin wadannan hanyoyi biyu:

    A kan aiwatar da samar, shi ne kai tsaye comminuted da kuma isar da hopper ta wajen atomatik feeding.The sabon abu ne gauraye amfani, amma bukatar tabbatar da cewa guga zafin jiki ne ba fi 60 digiri, in ba haka ba akwai iya zama m abu ( shawarar yanayin amfani)


  • Previous:
  • Next:

  • 
    WhatsApp Online Chat !